ELECTRICAL ESTIMATING APP

Electrical estimating and pricing app for field-ready quotes.

FieldSquire helps electricians capture devices, circuits, panels, fixtures, access, material, and crew labor while the job is still in front of them.

Available now on Android. Download FieldSquire for iPhone from the App Store. Review every AI-generated line before sending.

What is the FieldSquire electrical estimating app?

FieldSquire is an electrical estimating app for iPhone and Android that turns a spoken or typed job description into an itemized estimate. Electricians use it as an electrical estimator app to price devices, circuits, panels, fixtures, and wire with their own rates, edit every line, and send a branded PDF quote from the job site. The Solo plan is $19.99 a month with a 7-day free trial.

Looking for a electrical estimating app for a small contracting business?

FieldSquire is designed for quick field estimates—not enterprise software that takes weeks to configure. Use your own business profile, pricing, margins, terms, and document colors. AI prepares a draft; you stay in control of the bid.

Electrical bidding software built around counts, lengths, and labor

Organize the job by verified device and fixture counts, cable or conduit runs, panels, and installation tasks. Keep units clear: twelve receptacles are a count; a home run is a measured length plus the work needed to install it.

Build the material scope before applying rates

Include boxes, devices, covers, breakers, fittings, supports, connectors, and the specified wire type and conductor count. An 80 ft route is not automatically 80 ft of every conductor; terminations, vertical changes, slack, and the circuit design must be checked.

Keep installation and testing labor separate

Review rough-in, pulling, terminations, fixture installation, troubleshooting, labeling, testing, access, permits, and inspection allowances. FieldSquire organizes the bid; it does not design circuits, verify code compliance, or replace a qualified electrician’s plan takeoff.

See how the AI construction cost estimator combines your company rates with a reviewable scope and PDF proposal.

Why electrical estimates lose margin

Build a clearer scope, line by line

Service and panels

Service upgrades, panels, breakers, grounding, bonding, and labeling.

Branch circuits

Dedicated circuits, receptacles, switches, GFCI/AFCI devices, and home runs.

Lighting

Fixtures, recessed lights, controls, sensors, drivers, and installation.

Raceway and wire

Conduit, fittings, conductors, supports, pull labor, and terminations.

Troubleshooting

Diagnostic time, access, repair allowance, and follow-up work.

Closeout

Testing, labels, cleanup, permit allowance, and customer orientation.

Example electrical estimate lines

These examples show how scope can be separated for review. They are not prices or a substitute for verified measurements and supplier costs.

Line itemQuantityPricing basis
20A dedicated circuit2 eachMaterial + installation
Recessed LED fixtures12 eachFixture and labor
EMT conduit and fittings180 linear ftCompany unit price
Panel modification1 lotScope allowance
Testing and labeling4 hoursDirect labor cost

How FieldSquire works on a electrical job

  1. Start with the project type and scope. Add customer contact details, the job address, and a reminder later when needed.
  2. Record field notes or type the scope. Attach useful job photos for your own reference.
  3. Request an AI-assisted draft using the job context, company price list, and learned prices.
  4. Edit or delete each line, verify quantities and direct costs, and confirm exclusions and allowances.
  5. Let FieldSquire apply private overage and profit settings to calculate the selling price.
  6. Add terms, a deposit, and optional customer approval, then send the PDF by SMS or email.

SAVE THE PART OF THE DAY YOU CANNOT REPLACE

Fast quotes can give a busy contractor a workweek back.

FieldSquire is built to turn a walkthrough into an editable quote in a minute or two. If a contractor saves about 30 minutes across 20 quotes each week, that is roughly 40 hours returned over a month. Actual savings depend on quote volume and the old workflow—but less truck-seat paperwork means more time for paying work, customers, and home.

Built for solo contractors and five-person crews

Solo includes unlimited manual estimates, 20 successful AI estimates, and private learned prices. Crew includes 75 shared AI estimates and gives up to five members a shared business profile, leads, estimates, job photos, and learned prices. The owner keeps the company identity consistent while a contractor, salesperson, or foreman can be named on the quote.

An electrical pricing app built around your rates

Electrical work is priced by the device, the circuit and the hour, and every shop does it a little differently. FieldSquire starts lines for outlets, switches, fixtures, circuits, panels, wire and conduit from pricing for the job's ZIP code, then learns your numbers. Correct a panel change or a recessed light once and it uses your price on the next quote. Your labor rate, markup and service call fee stay private to your company.

An electrical quote app for service calls and small jobs

Walk the job and talk through it: add four circuits in the garage, swap the 100-amp panel for a 200, six recessed lights in the living room. FieldSquire turns that into an itemized electrical quote you can check line by line, add a deposit to, and send as a branded PDF the customer can sign on your phone before you leave.

Electrical estimating app or electrical estimating software?

Plan-based electrical estimating software is made for takeoffs on commercial bids with large assembly databases. An electrical estimating app is made for residential and service electricians pricing work in the field. FieldSquire is the second kind: $19.99 a month for Solo or $59.99 a month for up to five electricians, with a 7-day free trial.

Electrical estimating app for service calls and small projects

Use FieldSquire as mobile electrical estimating software for panel-change quotes, lighting estimates, device and circuit additions, troubleshooting proposals, and small commercial electrical bids. Build editable material and labor lines, record assumptions, and send a professional PDF from the field.

Questions about FieldSquire for electrical work

What is the best electrical pricing app for a small electrical contractor?

Look for one that prices at your own labor rate and markup, keeps device and circuit lines editable, and lets you send the quote from the job. FieldSquire does that on iPhone and Android and remembers your prices as you correct them.

Can I use FieldSquire as an electrical bidding app?

Yes, for residential, service and small commercial jobs priced in the field. For large plan-based commercial bids, most electricians still use desktop takeoff software alongside it.

Does FieldSquire provide NEC compliance?

No. It organizes an estimate draft. The licensed contractor remains responsible for code, load, conductor, protection, permit, and inspection requirements.

Can I price service calls and larger installs?

Yes. Use hourly diagnostic lines, fixed-scope assemblies, quantities, allowances, or a mix of labor and material lines.

Can a salesperson prepare the quote?

Yes. Crew members can use the shared business profile and identify who prepared the estimate, while the owner’s company pricing remains consistent.

Can I edit every part and device?

Yes. Every generated line can be changed or removed before the estimate is saved or sent.

What should I count before pricing an electrical job?

Record devices, fixtures, circuits, panels, and equipment, then measure the specified cable and raceway routes. Include boxes, fittings, supports, connectors, and required installation tasks.

Is a wire route length the same as total conductor length?

Not necessarily. Conductor count, vertical runs, terminations, slack, and the circuit design affect the material quantity. Confirm each run rather than treating one route length as every wire quantity.

How do I estimate electrical installation labor?

Separate rough-in, pulling, terminations, fixtures, labeling, testing, and troubleshooting. Check access, ceiling height, occupied spaces, and return trips when selecting crew hours.

Does FieldSquire design circuits or verify electrical code?

No. It prepares an editable cost draft, not a load calculation or compliant circuit design. The qualified electrician remains responsible for sizing, protection, permits, inspections, and local requirements.

How should an electrical service call be quoted?

Separate diagnostic time, the confirmed repair, incidental materials, and any minimum or travel charge. Explain what is not yet known and obtain approval before expanding the work.

Can different electrical materials keep different saved rates?

Yes. Keep the material description, size, specification, and unit with the rate. Verify that future matched items refer to the same material rather than a different wire, fitting, or device.

Test it on your next electrical walkthrough.

The Solo plan includes 7 days free and 5 successful AI estimates, after a free first quote with no account or card. It ends automatically with no charge.

Start the free Solo trial
⚡ First quote free
No account, no card • then 7 days free
Start Free Trial